+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
Fire prevention board, actually not it can fire, actually it also can happen burning phenomenon, just its refractoriness compares other material to want much taller, can hold longer in high temperatur...
Micro-combustion calorimetry (MCC) : First, let's see what Micro-combustion calorimetry (MCC) is: also known as pyrolytic combustion flow calorimetry (PCFC), which USES traditional oxygen consumption ...
Flame retardant materials are materials that can restrain or delay combustion but are not easy to burn by themselves. They are widely used in the fields of clothing, petroleum, chemical industry, meta...
Seam slip is a fabric problem, especially for fabrics that contain smooth yarns or have an open structure or a low number of warp and weft interweaves.These factors mean that one set of yarns can easi...
There is residual formaldehyde in textiles. Under the action of temperature and humidity, formaldehyde will be released to different degrees.In the process of storage and use, formaldehyde can enter t...
The breaking strength test of the fabric strength machine is to measure the breaking strength of the sample by holding it in the middle part of the sample in a clamp of a specified size and stretching...
As is known to all, the maintenance and repair of instruments and equipment must not be ignored, otherwise, it will cause the test test and other work can not be carried out smoothly.The same is true ...
At present, unidirectional (stress) stretching is mainly used in fabric tensile and fracture test, that is, the strength of fabric test strips in warp (longitudinal) direction, weft (horizontal) direc...
Factors affecting air permeability and moisture permeability The breathability and moisture permeability of composite fabric fabric can be expressed by wet resistance. When there is difference in wate...
1. Cause of pilling Clothes in the washing process or the actual wearing process, constantly from with the outside world, its friction, make the surface of the fabric show in fabric fiber end, on the ...
Textile concepts and classifications commonly used 1 Common Concepts 1. Warp direction, warp yarn, warp density -- direction of fabric length;The side yarns are called warp yarns;The number of threads...
Mass per unit area The most common method is to use a circular sampler to circle five circular samples with an area of 100cm2 or square samples with a side length of 10cm and weigh them on a balance. ...
2/F, 23 Building, Xinronghuayuan, Qingnian road, Xiangcheng Region, Zhangzhou City of Fujian PR, 363000, China.
+86 152 6060 5085
+86 596 7686689
English
русский
español
português
hello@utstesters.com
hello@utstesters.com
+86 152 6060 5085
+8615260605085