Hot Products

abrasion testing machine
Taber Wear and Abrasion Testers M009B

To determine the wear resistance(including mass loss, thickness loss, and transmittance etc.) of all kinds of structures including textiles, paper, glass, metals, paints, plated surfaces, coated materials, leather and rubber.

EN 71 KE Tester
Kinetic Energy Tester T011

T011 Kinetic Energy Tester is used to test the maximum energy produced from projectile toy shoot bullets or launched bows, so as to evaluate ejection articles will cause injury for children or not.

Dynamic Strength Tester
Toy Dynamic Strength (2m/s) Tester T012

T012 Dynamic Strength & 2m/s Tester is used test dynamic strength for wheeled ride-on toys. Simulate children wheeled ride-on toys vertically crush the inelastic step 50 x 50 mm at the stable speed of 2m/s±0.2/s, and then check the damage degree. This device can be used for children ride-on toys, such as children tricycle, toy bikes, scooters, etc.

Sharp Point Tester
Sharp Point Tester T004

Sharp point tester is to determine whether accessible sharp points on child-related products are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp.

Mouth Toy Endure Tester
Mouth Actuated Toy Tester T005

Used to test the safety of the Mouth-Actuated Toys, such as whistles with a ball, the sounders with a reed and other toys. Load the mouth-actuated projectile toy with the intended projectile and apply a pressure of 13,8 kPa ± 5 % in the direction of the mouthpiece for 5 s. Carry out the test 10 times in total.

Toys Accessibility Probe
Accessibility Probe T006

Accessibility Probe is used to assess the surface or components (points and surface of toys) of toys is likely to be touched and lead to hazardous. If the probe contacts the part or component, the part or component is considered to be accessible. Therefore, to do related tests based on standards to decrease hazards for children. This tools are including 2 parts: Probe A and Probe B. An accessible point for a toy or article intended for children 3 years of age or less is one that can be contacted by any portion forward of the collar of the accessibility probe designated as Probe A . An accessible point for a toy or article intended for children over 3 years of age is one that can be contacted by any portion forward of the collar of the accessibility probe designated as Probe B . An accessible point for a toy or article intended for children of ages spanning both age groups is one that can be contacted by any portion forward of the collar of either Probe A or B.

color matching cabinets
Color Matching Cabinets D008

Color light box/Color matching cabinet, to do color matching or assessment for all industries and applications where there is a need to maintain color consistency and quality. Such as, Dyeing, Packaging, Printing, Footwear, Inks and Textile, Automotive, Ceramics, Cosmetics, Foodstuffs, Furniture, knitwear, Leather, Ophthalmic,etc. D65, TL84, CWF, F, UV, U30 light sources are available for this light box.

EN 71 toy tester
Sharp Edge Tester T001

T001 Sharp edge tester is used to determine whether the accessible edges on child-related products are likely to cause potential risk of injury after normal use and reasonable abuse. Those child-related products include metal or glass edges on toys and other articles intended for use by children under 8 years of age.

ISO 17707 Whole Sole Flexing Machine
Whole Sole Flexing Machine H018

H018 Whole Sole Flexing Machine, to measure the material's resistance to incision elongation(cut growth) during repeated flexing, especially for outsoles of protective footwear, including soles. The machine has three vertical or horizontal stations available for customized and is easy to operate. Loading, unloading and measurements are also much easier to carry out with the workstations provided. The sample flexes at speed of 140 times per minute, and the exact number is recorded in a counter that has been preset to the required number of flexing. A fixture can be used to position the steel chisel, which can be used to support the sample after the initial chipping. All mobile parts that need access are fully protected with a fully interlocked security cover to ensure that the machine complies with the latest security regulations. A manual device can be used to measure the hardness of the outer bottom and check whether the outer bottom must be twisted in accordance with EN ISO 20344. UTS also provide a version of this machine for testing at low temperatures allowing tests to be conducted down to -20°C.

Water Resistance Tester
Shoe Water Resistance Tester H009

To determine the waterproofness property for finished shoes. Within the specified depth of water, whole shoe will be mechanically brushed by rotary wet brush, so as to measure the water penetration property for finished shoe.

NBS Abrader - Abrasion Tester
NBS Rubber Abrasion Tester H014

To determine the abrasion resistance property for rubber or other compounds, sole and heel materials which are not less than 2.54mm in thickness. This machine has memory function so that users can set the number of tests by themselves. The current records will be kept not to change even if power failure or stop occurs. It also can be connected to a cleaner for easy cleaning.

astm d1424  Elemendorf Tear Tester
Digital Elemendorf Tear Tester M006B

To determine the tearing resistance strength (Elmendorf method) for various textiles. Also available for thick paper, plastic cloth and electrical insulating tapes. Three interchangeable pendulums ranging from 16,000 to 128,000 Millinewtons (mN) can be selected separately for multiple test method compliance.

Latest news

  • UTSTESTER Joins Zhangzhou Cross-border E-commerce ...
    UTSTESTER Joins Zhangzhou Cross-border E-commerce ... 2023-10-16

    E-commerce, as an emerging business model, has achieved rapid development in recent years, especially the emergence of cross-border e-commerce industry, which has become a new engine of foreign trade ...

  • Italy - Milan | ITMA 2023: UTSTESTER Participated ...
    Italy - Milan | ITMA 2023: UTSTESTER Participated ... 2023/07/28

    Background ITMA is the world's largest international trade fair for textile and apparel machinery and technology. Established in 1951, ITMA is the only brand that encompasses the entire textile produc...

  • UTSTESTER Holiday Notice on International Labor's ...
    UTSTESTER Holiday Notice on International Labor's ... 2023/04/28

    Dear all, With Labor Day approaching, we would like to inform you that our company will be: Closed: From April 29 to May 3, 2023. Reopened: On May 4, 2023. All operations, including delivery and produ...


  • GB/T 35263-2017 Fabric cooling performance tester
    Fabric cooling performance tester M125
    The fabric cooling performance tester is a judgment about coldness and warmth formed in the human brain by the temperature stimulation of the fabric after the fabric comes into contact with the human skin. When the fabric comes into contact with the skin, due to the temperature difference, there will be a difference between the fabric and the skin. Heat exchange causes the temperature of the skin to increase or decrease; the form of heat exchange between the fabric and the skin is mainly heat conduction, and the influence of thermal radiation and natural convection inside the fabric is very small and can be ignored; under normal circumstances (except when the ambient temperature is higher than (excluding skin temperature), the skin temperature is higher than the ambient temperature, so the skin temperature often drops after the fabric comes into contact with the skin. Used to test the coolness of pajamas, bedding, fabrics, and underwear.
    Read More
  • Benchtop Grating Spectrophotometer
    Benchtop Grating Spectrophotometer UTS-6010
    enchtop grating spectrophotometer which is developed by 3nh independently with independent intellectual property.enchtop grating spectrophotometer has many features, like 7 inches TFT capacitive touch screen display, full illuminants, reflective d/8 and transmissive d/0 geometry(including or excluding UV). With very stable and precise color measurement, large storage and powerful PC software all makes  ideal for color analysis within R&D and laboratory environments.
    Read More
  • benchtop spectrophotometer
    Benchtop Spectrophotometer(High Configuration) UTS-6060
    UTS-6060 has many features, like 7 inches TFT capacitive touch screen display, full illuminants, reflective d/8 and transmissive d/0 geometry(including or excluding UV). With very stable and precise color measurement, large storage and powerful PC software all makes UTS-6060 ideal for color analysis within R&D and laboratory environments.
    Read More
  • humidity environmental test chambers
    Programmable Climatic Test Chamber E001N-408L
    Constant temperature and humidity test chamber can simulate a variety of environmental conditions, can help a variety of products and raw materials to detect heat, humidity, dry, low temperature and other performance, based on new energy, electronics, chemicals, automobiles, ships and other large industries and applicable to printing, electronics, metals and other industries.
    Read More
  • climate chamber price
    Constant Temperature Humidity Chamber E001N-225L
    Constant temperature and humidity test chamber, also known as constant temperature and humidity test machine, constant temperature and humidity test chamber, programmable hot and humid alternating test chamber, constant temperature machine or constant temperature and humidity chamber, used to test the performance of materials in a variety of environments and test a variety of materials heat resistance, cold resistance, dry resistance, moisture resistance performance. Suitable for electronics, electrical appliances, cell phones, communications, instruments, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products for testing quality.
    Read More
  • humidity chamber price
    Temperature Humidity Test Chamber E001N-150L
    Temperature humidity test chamber is to determine resistance to hot, cold, dry and moisture property for various material. Applicable for products quality management of electronic, electrical appliances, food, vehicles, metals, chemicals, building materials, etc.
    Read More
  • climatic test chamber
    Environmental Test Chamber E001N-80L
    E001N Programmable Temperature and Humidity Chamber  Application Constant temperature and humidity chamber is used to determine resistance to hot, cold, dry and moisture property for various material. UTS temperature and humidity chamber is applicable for products quality management of electronic, electrical appliances, food, vehicles, metals, chemicals, building materials, etc. Standards GB/T2423.2-89 High-temperature test method Bb GB2423.1-89 Test A: Low-temperature test method 6 IEC60068-2-1 Low temperature test method Ab GJB150.4-1986 Low temperature test EIA-364-59 Low temperature test IEC60068-2-38 Temperature loops IEC60068-2-78 Constant humidity and heat MIL-STD-202G-103B Humidity test IEC60068-2-30 Humid heat temperature loop EIA-364-31C Humidity resistance GB/T2423.3 Test method for constant humidity and heat GJB150.4-86 Military equipment environmental test method low temperature test GJB150.3-86 Military equipment environmental test method high temperature test GB/T2423.34-2005 Temperature and humidity combined cycle test method Features 1. With USB download function, with RS232 interface, curved software, no need for recorder 2. With vacuum glass observation window, more effective direct observation function 3. Refrigerant servo valve flow calculation control. Energy saving 30%, with a dormant function of the resident flow time, energy saving 50% or more 4. Anti-electromagnetic interference controller with SGS certification; with more than 32 numbers of soft program matching, with multiple development and software upgrade function 5. Defrost cycle (800 defrost cycles once, each defrost guaranteed within 2 hours, integrated test to achieve 25% energy saving) Optional Models Model E001N-80L E001N-150L E001N-225L E001N-408L E001N-800L E001N-1000L Inner box volume 80L 150L 225L 408L 800L 1000L Test chamber size  (W x H x D)cm 40×50×40 50×50×60 60 x 75 x 50 80 x 850 x 60 100 x 100 x 80 100×100×100 External size (D*W*H) (cm) 133*75*172 149* 70*155 149*800*168 159*100*185 179*120*197 199*120*197 Weight(kg) 180 210 260 330 450 500 Power supply 1 Phase, AC 220V 50/60Hz 3 Phase, AC, 380V, 50/60HZ Key Specifications 1. Temperature The temperature range -20 ℃ ~ + 150 ℃ / -40℃ ~ + 150 ℃ / -70℃ ~ + 150 ℃ Temperature deviation ≦ ± 2.0 ℃ Temperature fluctuations ± 0.5 ℃ Temperature evenness ≦ 2.0 ℃ cooling rate Heating rate: - 20 ℃ to + 100 ℃ about 35 min (At no-load state, environmental temperature + 25 ℃) Cooling rate: from + 20 ℃ to - 20 ℃ about 45 min  (At no-load state, environmental temperature + 25 ℃) 2. Humidity Humidity range 20%R.H~98%R.H Humidity deviation ±3.0%RH(>75%RH) ±5.0%RH(≤75%RH) Humidity uniformity ±3.0%RH (No load) Humidity fluctuation ±2.0%RH The temperature and humidity performance test is based on the relevant regulations of iec 60068-3 standard.The sensor is placed at the outlet of the unit. Chamber Structure Consist The test box adopts the whole structure form, that is, the test box consists of three parts: heat preservation box body, independent refrigeration unit and electric control cabinet Composition. Cabinet size Inner box size: W 1000 x H 1000 x D 800 mm Outer box size: W 1200 x H 2035 x D 1815mm (excluding machine stand) Heat preservation box External wall material: high quality carbon steel plate with electrostatic color spray treatment on the surface; Inner wall material :SUS304# fog-faced stainless steel plate; Insulation material: hard polyurethane foam insulation layer + glass fiber. Chamber door Single door, left open, add heating wire to the door frame to prevent condensation at the door frame at low temperature.  observation window W 460 x H 560mm observation window is installed on the door of the box. Multi-layer hollow electrothermal coated glass can effectively keep warm and prevent condensation. Lighting device LED lighting device, installed in Windows Heater High quality nickel-chrome wire electric heater, contactless control mode (SSR). Humidifier Water basin heating and humidifying method; Stainless steel armor heater; Heater control mode: contactless control mode (SSR); Water level control device, heater dry - burning device. The condensate outlet hole equipped with the studio condensate and the unit condensate drain hole. Electrical outlet & cord hole One for each side of left and right chamber, diameter 50mm, equipped with rubber isolation plug and rubber cover. Sample frame Two layers of stainless steel sample frame with adjustable height and carrying weight of 30kg/ layer. Moving castor Including moving castor Power distribution control cabinet. General power circuit breaker and overtemperature protector Complement water system Water pump provide automatic water supply Demonstration Photos Materials To Be Tested Export Shipment Package Related Products        E002A Salt Spray chamber    E002C Composite Salt Wet & Dry Chamber    E002W-8m3 Walk In Salt Spray Tester    M0025BN UV Accelerated Chamber
    Read More
  • bally leather flexing tester
    Leather Resistance Flexing Tester H053AN
    To determine resistance to flex property for leather, fabric, etc. Assess the flexing resistance of leather by damage condition of samples after flexing for a certain of times.
    Read More
  • vamp flex test
    Vamp Material Flexing Tester H049
    To determine flexing resistance or physical damage for all of vamp soft materials including leather, clothing and upholstery coverings. It also can be used to test seam construction during flexing.
    Read More
  • martindale rub test
    Martindale Abrasion Tester H056BN
    H056BN Martindale Abrasion Tester Overview Martindale wear and abrasion tester, available with up to 9 stations and adaptable to test a wide range of applications - socks, textiles, leather, carpets, coated upholstery, and shirt collars. This machine is ideal for wear-resistant testing of various types of fabrics and leather footwear, upholstery, garments, gloves and other such products. Martindale is internationally recognized as a abrasion resistant test standard for fabrics and can also be used to test the pilling performance of fabrics. H056 Martindale tester can also be used for abrasion resistance and durability of rubber gloves, plastic and rubber coatings, plastic and rubber coated fabrics, using a piece of granulated sandpaper instead of a standard abrasives. The machine can be used to test the dirty condition of light-colored materials. In such tests, a special ink-printed fabric is used instead of a standard friction agent. A small amount of standard abrasive cloth is supplied with the machine. Standards ASTM D4966, BS-3424, DIN-53863, GB/T 20991,  SATRA TM31, ISO 5470-2, GB/T 19089, GB/T 3903.16 ,   EN ISO 12947, EN ISO 20344:6.12, BS EN 388:2003 Features Working Position Variety Mini martindale tester is available in 4, 6, 8, 9 station models. Full kit provided to do abrasion resistance test and pilling on textiles, coated fabrics, leather, socks, soiling, etc. Friendly design Gives access to adjust test speed and safety lid equipped to cover the test rod. Precision Motion Motion according to 24mm and 60mm Lissajous track. LCD & Touch screen Display Simple to use UTSTESTER Touch control system with individual station counters , providing easy operation. Specifications Model H056BN Working positions 4 Display Touch Screen Abrasion table ≧¢125mm Load 595 g , 795 g Lissajous figure 60±1 mm x 60±1 mm Press load Mass : (2.5 ± 0.5) kg Diameter: Φ(120 ± 10) mm Rotary speed 47.5 ± 2.5 r/min Sample exposed area 645 ± 5 mm2 Control mode LCD 0~99,999,999 Pressure plate SUS 304 stainless steel Lissajous figure 60±1 mm x 60±1 mm Power supply 1∮, AC 220V,3A Dimensions 570×640×340mm. ( L x W x H ) Weight   78kg Accessories Abrasion Weight and Holder 1unit Φ165mm Standard Abradents Fabric 2units per position Φ165mm Standard Woven Felt Discs 2units per position Φ44mm Standard Backing Foam 60units Press load 1unit Power wire 1unit Materials To Be Tested
    Read More
  • leather abrasion tester
  • FZ/T 01004 Hydrostatic Head Tester
    High Pressure-servo Hydrostatic Head Tester M023B
    To test the waterproof property for fabric, Such as canvas, medical non-woven material, coated fabric, geosynthetic materials, cloth, tent cloth, tarpaulin and rainproof clothing fabric.
    Read More
  • Leather test equipment
    Leather Bally Resistance Flexing Tester H053AN
    Application To determine resistance to flex property for leather, fabric, etc. Assess the flexing resistance of leather by damage condition of samples after flexing for a certain of times. Standards EN 13512 ; EN344-1 section and annex C; EN ISO 20344 section GB/T20991 section; AS/NZS 2210.2 section GE-24; JIS-K6545; SATRA TM 55; IULTCS/IUP 20-1 ISO5402-1: 2011; ISO 17694   Test Principle Fix one end of sample on the upper fixture, the other end onto bottom fixture to make sample at 90. Then flex sample at a specified speed and angle. After flexing for a certain of times to assess damage degree of sample.   Features 1.Upper fixtures are driven by motor to do reciprocating motion with horizontal shaft. Downward moving angle is 22.5±0.5. 2.Flexing times can be set and real flexing times is display at real time. 3.Counter stop to count when reached preset test times and machine stop to work automatically. 4.12 or 24 working positions can be optional. 5.With manual location function. Key Parameters Model H053A Working position 12 or 24 Sample size 70×45mm Counter LCD,0~99,999,999 Dimension( L x W x H ) 78x45x36 cm Weight 78kg Power 1∮, AC 220V , 50/60HZ   Accessory Standard accessory Power line  Demonstration Materials To Be Tested
    Read More
  • GB4744-84 Portable Suter Tester
    Portable Suter Tester M023E
    The machine is used to test the water pressure of waterproof suit series, raincoat series, tent series, waterproof bag series, waterproof glove series and other products when adding certain pressure. Through the pressure gauge, we can know the pressure of the tested object and whether the tested object is qualified under this pressure.
    Read More
  • Martindale Abrasion Tester
    Wood Floor Martindale Abrasion Tester M008D-2
    The test piece is placed in the fixture of MARTINDALE wear-resisting testing machine.The constant pressure causes it to conduct friction on the sample according to the operation trajectory of LISSJOUS diagram. After a certain number of times of friction, the wear-resisting performance of the test material is evaluated by measuring the degree of wear of the sample. Standards ISO 12947-1, EN 16094, IKEA IOS-TM-0002 Test Principle Description of a method to assess the surface resistance to micro scratching and relates to rigid surfaces of all finished products regardless of materials. The test method can be used for all types of surface coatings and coverings except for lacquers with pearly or metallic effects. It does not apply to finishes on leather and fabrics. The test is intended to be carried out on a part of finished furniture, but can be carried out on test panels of the same material, finished in ar identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test shall be carried out on unused surfaces. Specifications Model M008D-2 Speed (47.5±5)CPM,16 RPM to complete a Lissajous graph. Loading (4±1)N Medium size Φ(89±1)mm The sample size 150*150mm Dimension 720*300*400mm Weight 57kg Electrical source AC 220V,10A Assessment The assessment shall be performed in evenly diffused artificial daylight giving an illumination on the test surface of 1200 ±400 lux. Carefully examine the test area for scratches using the numerical rating scheme below. For this purpose illuminate the surface separately using the diffuse light source and examine from different angles, including angle combinations such that the light is reflected from the test surface and towards the observer's eye. Viewing distance shall be 0.25 m to 0.5 m.
    Read More

Copyright © UTS International Co., Ltd

Contact Us