NEWS

Hot Products

abrasion testing machine
Taber Wear and Abrasion Testers M009B

To determine the wear resistance(including mass loss, thickness loss, and transmittance etc.) of all kinds of structures including textiles, paper, glass, metals, paints, plated surfaces, coated materials, leather and rubber.

EN 71 KE Tester
Kinetic Energy Tester T011

T011 Kinetic Energy Tester is used to test the maximum energy produced from projectile toy shoot bullets or launched bows, so as to evaluate ejection articles will cause injury for children or not.

Dynamic Strength Tester
Toy Dynamic Strength (2m/s) Tester T012

T012 Dynamic Strength & 2m/s Tester is used test dynamic strength for wheeled ride-on toys. Simulate children wheeled ride-on toys vertically crush the inelastic step 50 x 50 mm at the stable speed of 2m/s±0.2/s, and then check the damage degree. This device can be used for children ride-on toys, such as children tricycle, toy bikes, scooters, etc.

Sharp Point Tester
Sharp Point Tester T004

Sharp point tester is to determine whether accessible sharp points on child-related products are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp.

Mouth Toy Endure Tester
Mouth Actuated Toy Tester T005

Used to test the safety of the Mouth-Actuated Toys, such as whistles with a ball, the sounders with a reed and other toys. Load the mouth-actuated projectile toy with the intended projectile and apply a pressure of 13,8 kPa ± 5 % in the direction of the mouthpiece for 5 s. Carry out the test 10 times in total.

Toys Accessibility Probe
Accessibility Probe T006

Accessibility Probe is used to assess the surface or components (points and surface of toys) of toys is likely to be touched and lead to hazardous. If the probe contacts the part or component, the part or component is considered to be accessible. Therefore, to do related tests based on standards to decrease hazards for children. This tools are including 2 parts: Probe A and Probe B. An accessible point for a toy or article intended for children 3 years of age or less is one that can be contacted by any portion forward of the collar of the accessibility probe designated as Probe A . An accessible point for a toy or article intended for children over 3 years of age is one that can be contacted by any portion forward of the collar of the accessibility probe designated as Probe B . An accessible point for a toy or article intended for children of ages spanning both age groups is one that can be contacted by any portion forward of the collar of either Probe A or B.

color matching cabinets
Color Matching Cabinets D008

Color light box/Color matching cabinet, to do color matching or assessment for all industries and applications where there is a need to maintain color consistency and quality. Such as, Dyeing, Packaging, Printing, Footwear, Inks and Textile, Automotive, Ceramics, Cosmetics, Foodstuffs, Furniture, knitwear, Leather, Ophthalmic,etc. D65, TL84, CWF, F, UV, U30 light sources are available for this light box.

EN 71 toy tester
Sharp Edge Tester T001

T001 Sharp edge tester is used to determine whether the accessible edges on child-related products are likely to cause potential risk of injury after normal use and reasonable abuse. Those child-related products include metal or glass edges on toys and other articles intended for use by children under 8 years of age.

ISO 17707 Whole Sole Flexing Machine
Whole Sole Flexing Machine H018

H018 Whole Sole Flexing Machine, to measure the material's resistance to incision elongation(cut growth) during repeated flexing, especially for outsoles of protective footwear, including soles. The machine has three vertical or horizontal stations available for customized and is easy to operate. Loading, unloading and measurements are also much easier to carry out with the workstations provided. The sample flexes at speed of 140 times per minute, and the exact number is recorded in a counter that has been preset to the required number of flexing. A fixture can be used to position the steel chisel, which can be used to support the sample after the initial chipping. All mobile parts that need access are fully protected with a fully interlocked security cover to ensure that the machine complies with the latest security regulations. A manual device can be used to measure the hardness of the outer bottom and check whether the outer bottom must be twisted in accordance with EN ISO 20344. UTS also provide a version of this machine for testing at low temperatures allowing tests to be conducted down to -20°C.

Water Resistance Tester
Shoe Water Resistance Tester H009

To determine the waterproofness property for finished shoes. Within the specified depth of water, whole shoe will be mechanically brushed by rotary wet brush, so as to measure the water penetration property for finished shoe.

NBS Abrader - Abrasion Tester
NBS Rubber Abrasion Tester H014

To determine the abrasion resistance property for rubber or other compounds, sole and heel materials which are not less than 2.54mm in thickness. This machine has memory function so that users can set the number of tests by themselves. The current records will be kept not to change even if power failure or stop occurs. It also can be connected to a cleaner for easy cleaning.

astm d1424  Elemendorf Tear Tester
Digital Elemendorf Tear Tester M006B

To determine the tearing resistance strength (Elmendorf method) for various textiles. Also available for thick paper, plastic cloth and electrical insulating tapes. Three interchangeable pendulums ranging from 16,000 to 128,000 Millinewtons (mN) can be selected separately for multiple test method compliance.

Latest news

  • UTSTESTER Attended Sales Elite Training Activities...
    UTSTESTER Attended Sales Elite Training Activities... 2023-08-23

    In order to further build a guidance marketing team, improve the ability level of sales elites, and consolidate the grassroots battle fortress, UTSTESTER actively participated in the "Foreign Trade Ma...

  • Birthday for Employees, Warm Concern for Heart
    Birthday for Employees, Warm Concern for Heart 2024-02-01

    In order to better communicate with the staff, reduce the distance between the staff, so that the staff can work at ease, UTSTESTER company carried out a "birthday for employees" warm care warm heart ...

  • UTSTESTER Spring Festival Holiday Arrangements
    UTSTESTER Spring Festival Holiday Arrangements 2024-02-01

    Dear Customer, On the occasion of the Chinese Spring Festival, the most important traditional festival in China, we would like to inform you that our company will be on holiday. Our office will be clo...

Products News
  • Accessibility Probe  A.B Manual
    Accessibility Probe A.B Manual

    2019/07/01

    Simulate finger safety tester Simulate finger safety tester hold the probe with joints to the parts of the toys, if the probe contacts with the parts,those parts are considered to be touched. The probe adopts rigid material. All the tolerances are±0.1mm, excluding±1mm of f and g. See fig.1 and table 1. Fig.1 Accessibility Probes Table 1 Accessibility Probes size TEST PROCEDURE Dismantle all the ap...

    Read More
  • Some point of Sharp Edge Tester
    Some point of Sharp Edge Tester

    2019-06-13

    T001 Sharp edge tester is used to determine whether the accessible edges on child-related products are likely to cause potential risk of injury after normal use and reasonable abuse. Those child-related products include metal or glass edges on toys and other articles intended for use by children under 8 years of age. Test Principle A self adhesive PTFE tape is attached to a mandrel, which is then ...

    Read More
  • Use of the Crease Recovery Tester
    Use of the Crease Recovery Tester

    2019-06-12

    Crease Recovery Tester is used to determine crease recovery performance of fabrics by creasing in a loading device for a predetermined time using a weight suitable for the test method specified (BS, ISO, AATCC). After transferring the specimen to the clamp of the tester, the specimen is allowed to recover and the angle of recovery is recorded. Standards ISO 2313, BS EN 22313, M&S P22, AATCC 66...

    Read More
  • Some knowledge of AATCC Manual Crockmeter
    Some knowledge of AATCC Manual Crockmeter

    2019-06-11

    AATCC Manual Crockmeter is used to determine colour fastness to wet and dry rubbing. Apart from textiles, also can be applicable for carpets, laminates, and printing inks, as well as the micro-scratch resistance of lacquers, coatings and painted surfaces. Provided with a steel specimen holder and 16mm diameter test finger. This unit consists of control system and rubbing system. Fix sample on the ...

    Read More
  • How to use Heel Impact Tester
    How to use Heel Impact Tester

    2019-06-04

    Heel Impact Tester is used to determine resistance of sole to impact load. When test, each time increase impact energy until heal break / rupture and read impact index. Standards BS-5131, ISO 19953, QB/T 2863, SATRA TM20. sample preparation: Take 3 heels of the same size for the same type and draw a marking line on the back of the heel 6mm from the heel heel tip with a steel ruler. Test steps 1, h...

    Read More
  • Knowledge and usage of martindale testing machine
    Knowledge and usage of martindale testing machine

    2019-06-03

    The Heel Fatigue Tester is used to test resistance to repeated impact property for medium and high heels of female’s shoes at wearing state. Under once per second, free fall motion, 0.68J energy, pendulum bob fall down to the vertical position from horizontal position, this machine impact female’s shoe heel until heel rupture / breakage or required fatigue times reached. Standards SATRA TM21,BS-51...

    Read More
  • Some knowledge of the electronic yarn twist tester
    Some knowledge of the electronic yarn twist tester

    2019-05-29

    Electronic Yarn Twist Tester is used for determining the twist of various yarns. The properties of the Twist Tester are in conformity with the new national standard GB2543.1~GB2543.2 Textiles--Determination of twist in yarn, the international standard ISO2061 Textiles - Determination of twist in yarn - Direct counting method, the standard of the former Ministry of Textile Industry FJ547 Test metho...

    Read More
  • Common types and test methods for colour fastness of textiles
    Common types and test methods for colour fastness of textiles

    2019-05-28

    Color fastness is also known as dyeing fastness and fastness.Refers to the color of textiles in the processing and use of various functions of resistance.The fastness grade is evaluated according to the color change of the sample and the stain of the undyed fabric.Textiles in the process of its use will be light, washing, ironing, sweat stains, friction and chemical agents and other external effec...

    Read More

Copyright © UTS International Co., Ltd

Contact Us