+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
The salt spray test is an environmental test that uses salt spray test equipment to create artificially simulated salt spray environmental conditions to confirm the corrosion resistance of a product o...
Tensile Strength Test method: ASTM D 5034, determination of breaking strength and elongation of fabric. Key points: This test provides information on the potential breaking strength of the garment fab...
The main factor affecting the color fastness to moisture 1, the type of fabric, fabric structure 2, textile pretreatment, such as desizing, boiling, bleaching, mercerizing, etc 3, the choice of textil...
The 45 degree burner is applicable to ASTM D2863, ASTM D3835, ISO 4589-2, GB/T 2641-2008, GB/T 17591-1998 and other standards It is used to measure the flame spread rate of a material, which is an imp...
Working principle: Constant temperature and humidity box is a special experimental equipment, it can fine-tune the internal environmental parameters (such as temperature, humidity, wind speed, a...
As people's lifestyles become more and more healthy, physical fitness activities are widely carried out. After exercising, in addition to enjoying the happiness brought by exercise, a lot of sweating ...
With the implementation of GB/T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020 and other method standards, the results of eye ratings of the above standards al...
GB/T 40910-2021 Textiles - Evaluation of Waterproof and Moisture Permeable Properties For what products? All kinds of fabrics and their products Main products: ski suits, jackets, sleeping bags, prote...
Textile contact cooling test refers to testing the cooling effect of textiles after contact with human skin to evaluate their quality and performance. The cooling effect refers to the cooling feeling ...
The production and manufacturing processes of textiles are relatively complex. The clothes people wear actually go through countless processes before they are transformed from cotton or yarn into fabr...
1 Scope 1-1 This method is suitable for judging the ability of fabrics to resist pilling and other changes in surface properties. The instrument used is the Martindale tester, and this method is suita...