Blog
Catalog
Latest Blog
[up to standard] GB/T12704 ASTME96 JISL1099 BS7209, etc. "Method for The Determination of Moisture Permeability of Fabrics - Moisture Permeability Cup method/Method A" Standard Test Methods for Water ...
1 Function introduction The instrument is designed by absorbing the advantages of similar instruments at home and abroad, using touch screen display, frequency converter + frequency conversion motor d...
Mass per unit area The most common method is to use a circular sampler/sample cutter to circle five circular samples with an area of 100cm2 or square samples with a side length of 10cm, and put them o...
Nonwovens break through the traditional textile principle, and has a short process, production speed, high yield, low cost, wide use, raw material sources and other characteristics, is a new generatio...
Fabric shrinkage refers to the percentage of fabric shrinkage after washing or soaking in water. Shrinkage is a phenomenon in which the length or width of textiles changes in a certain state through w...
What is the moisture absorption and drying ability of textiles? As one of the hottest functional fabrics in recent years -- moisture-absorbing quick-drying fabric, In the market development is relativ...
Tensile Strength Test method: ASTM D 5034, determination of breaking strength and elongation of fabric. Key points: This test provides information on the potential breaking strength of the garment fab...
The composition of human sweat is complex. The main component is salt, which varies from person to person. Sweat can be acidic or alkaline. On the one hand, clothes with unqualified color fastness to ...
Textile contact cooling test refers to testing the cooling effect of textiles after contact with human skin to evaluate their quality and performance. The cooling effect refers to the cooling feeling ...
The waterproof performance of fabrics is mainly divided into the fabric's resistance to being wetted by water and the fabric's resistance to water penetration. Characteristic indicators of the waterpr...
1 Scope 1-1 This method is suitable for judging the ability of fabrics to resist pilling and other changes in surface properties. The instrument used is the Martindale tester, and this method is suita...
1.Instrument 1.1 Pendulum-type tearing force testing machine, the test cloth sample is fixed between two jaws, one side is movable and the other side is a fixed structure. The movable jaws are connect...