+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
Textile production and production process are relatively complex, people wear clothing is actually through countless processes will be transformed from cotton or yarn into fabric products, among which...
Four cases where uncertainty is not reported 1.In some cases, recognized testing methods specify limits for the main sources of measurement uncertainty and specify the presentation of calculation resu...
The salt spray test is an environmental test that uses salt spray test equipment to create artificially simulated salt spray environmental conditions to confirm the corrosion resistance of a product o...
Working principle: Constant temperature and humidity box is a special experimental equipment, it can fine-tune the internal environmental parameters (such as temperature, humidity, wind speed, a...
With the implementation of GB/T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020 and other method standards, the results of eye ratings of the above standards al...
Linear density is the thickness of fibers and yarns. It can be directly expressed by the cross-sectional diameter, cross-sectional perimeter or cross-sectional area of fibers and yarns. When the cross...
Textile contact cooling test refers to testing the cooling effect of textiles after contact with human skin to evaluate their quality and performance. The cooling effect refers to the cooling feeling ...
Market status of China's textile testing equipment industry The development of the domestic textile industry, China's textile testing equipment industry is also developing rapidly, the market scale is...
Twist test principle: The twist is usually not evenly distributed on the entire yarn. When testing the twist, the sample should be taken 1 m away. Under the specified tension, clamp both ends of the s...