NEWS
Common problems with whirlpool washing machines
  • 2019-12-10 18:18:56

Whirlpool shrinkage washing machines for undrained service

Whirlpool shrinkage washing machine is one of the necessary testing instruments for many textile enterprises at present. It is used for large consumption and long working hours at ordinary times. Whirlpool washing machine will inevitably have various faults and problems.

Whirlpool washing machine does not drain the reason:


The washing machine that the family USES is to rely on water to wash clothings, did not have the function of dry cleaning, so the washing machine realizes the function that enters and leaves water automatically, saved manpower greatly, can finish the process of washing clothes without effort.However, whirlpool washing machine does not drain the situation, as long as the corresponding reason to find, you can quickly solve the problem.


First of all, the drain pipe of the washing machine is blocked or severely bent, blocking the water access and cutting off the channel between the water inside the washing machine and the floor drain.Because the drain pipe is a white hose, once more than 90 degrees of bending, the water can not be successfully discharged, resulting in whirlpool washing machine drainage.


Then there is the failure of the part of the washing machine that controls the drainage function, which is caused by the loss of the line controlling the drainage switch or the insertion line of the drainage electromagnet.By using the washing machine's single dewatering function, that is, turning off the washing and rinsing functions, the machine's drain electromagnets are detected to be malfunctioning at the instant the machine is started.Through the reading of the multimeter, determine whether the internal wiring of the washing machine is normally connected.At this point it is necessary to replace the corresponding broken parts, restore the overall function of the washing machine.


Maintenance method:

A complete laundry process is water, water function is good, through the dehydration of the treatment, can reduce the moisture contained in the clothes, clothes can be faster drying.One of the most common failures is that the washing machine does not drain because the drain pipe is blocked or twisted to break the water flow path.For the reason of the drain pipe, whirlpool washing machine does not drain the maintenance method is to first of all the drain pipe reposition, and straight drain pipe and floor drain connection, to ensure that the water can be successfully removed;The circumstance that is drain conduit is blocked next, be about to clean drain conduit, can tear down drain conduit, clear the foreign body inside tube, install to washing machine interior again.


Whirlpool washing machine does not drain may be the washing machine internal control drainage function of the circuit, the solenoid valve failure.The determination of the fault is through single dehydration function of washing machine, set the washing machine to the dehydration function, cancel the other function, press the start button, smacked if you don't get sucked up vocalist, means that is draining circuit or electromagnetic valve fault, so need to replace the drain line or solenoid valve, Suggestions, please professional maintenance personnel for repair.


Whirlpool washing machine drain valve automatically open drain analysis

For fully automatic washing machine, its washing process in each part, is subject to the control of the computer board.For example, in water, the wave wheel can not turn;During laundry, the drain valve should be closed;When dehydrated, the wheel stops spinning and so on.

Whirlpool full automatic washing machine, water normal, washing clothes normal, the wave wheel rotation, but as long as a wash clothes, the drainage valve automatically open, drainage valve is 3 wire, separate drainage is no problem.


The fault is in the laundry, should not be the action of the drainage valve action, resulting in the laundry, the water out, not normal laundry fault.


Feel should be the problem of drain valve, then separate dehydrate, see drain is normal.There is no problem with the washing machine draining when it is set to the dehydration program alone.From this point of view, there is no problem with the drain valve, the fault should be in the main board.


Because fully automatic washing machine each part of the work, by the main board control.Mainboard water supply and drainage valve power supply, drainage valve open.This is because the main board in need of drainage, but the water supply and drainage valve provides a working power supply, resulting in the failure.


For this kind of fault, because it is a fault of the motherboard, generally did not go to repair the motherboard, but directly replace the motherboard to come directly.


Email: hello@utstesters.com

Direct: + 86 152 6060 5085

Tel: +86-596-7686689

Web: www.utstesters.com


Previous Next

Copyright © UTS International Co., Ltd

Contact Us