• 2022-01-11

Textile production and production process are relatively complex, people wear clothing is actually through countless processes will be transformed from cotton or yarn into fabric products, among which...

• ASTM E96 Moisture transmission instrument
• JIS L1099 A1 Moisture transmission tester
• JIS L1099 B1 Moisture transmission testing machine

• 2022-03-28

Four cases where uncertainty is not reported 1.In some cases, recognized testing methods specify limits for the main sources of measurement uncertainty and specify the presentation of calculation resu...

• ISO 12947 Textile testing instrument
• ASTM D5034 Textile testing machine
• FZ/T20019 Textile tester

• 2022-11-24

The process of fabric pilling: Hairiness --- fluffing --- entanglement --- forming a group --- tightening into a ball --- shedding fluff: Plush is initially produced along the longitudinal direction o...

• ASTM D4970 Martindale Tester
• IS012945-1 Pilling Box
• ASTM D3512 random tumbling

• 2023-02-14

Tensile Strength Test method: ASTM D 5034, determination of breaking strength and elongation of fabric. Key points: This test provides information on the potential breaking strength of the garment fab...

• ASTM D5034 tensile strength for lab
• ASTM D1424 Tearing Strength Tester
• ASTM D3786 Bursting Strength Tester

• 2023-03-20

The 45 degree burner is applicable to ASTM D2863, ASTM D3835, ISO 4589-2, GB/T 2641-2008, GB/T 17591-1998 and other standards It is used to measure the flame spread rate of a material, which is an imp...

• The tester to measure material flame spread rate
• ASTM D2863 45 degree combustion tester
• 45 degrees burning box for ISO 4589-2

• 2023-11-17

1 Scope 1-1 This method is suitable for judging the ability of fabrics to resist pilling and other changes in surface properties. The instrument used is the Martindale tester, and this method is suita...

• ASTM D4970 Fabric Pilling Resistance
• Martindale Test Method machine
• Tester for ASTM D4970 Test Method

• 2024-06-19

The fabric air permeability meter is used to test the air permeability of materials such as non-woven fabrics, melt-blown fabrics, special industrial fabrics, general fabrics, sponges, knitted fabrics...

• air permeability measurement
• air permeability astm d737
• air permeability tester for textiles

• 2024-07-19

The classification of leather is quite complex. According to the tanning method, it can include chrome tanned leather, vegetable tanned leather, oil tanned leather, aldehyde tanned leather and combine...

• astm d3884 taber abrasion
• taber abrasion machine
• taber abrasion resistance

• 2024-07-19

My country's current standard for leather shoe heels QB/T 3643-1999 "Leather Heel Surface" stipulates the wear resistance of the leather shoe heel surface using the standard method of GB/T 3903.2-1994...

• linear abraser
• bayer abrasion test
• taber scratch tester

• 2024-07-22

GB4085-2015 was implemented on August 1, 2016. It is a test method for "semi-rigid polyvinyl chloride block flooring". This standard specifies the terminology of semi-rigid polyvinyl chloride block fl...

• taber abraser test
• taber abrasion machine
• taber abrasion test astm

• 2024-07-26

Test standards: The fabric's color fastness to light and perspiration is tested using GB/T 14576-2009 "Textiles Color Fastness Test - Light and Perspiration Composite Color Fastness"; the pH value of ...

• perspiration fastness tester
• perspirometer tester
• ASTM E1164 Benchtop Spectrophotometer

• 2024-08-14

Twist test principle: The twist is usually not evenly distributed on the entire yarn. When testing the twist, the sample should be taken 1 m away. Under the specified tension, clamp both ends of the s...

• yarn abrasion tester
• single yarn strength tester
• yarn twist counter