+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
The hydrostatic pressure tester is suitable for measuring the water permeability performance of various fabrics and non-woven products that have been waterproofed, such as canvas, geotechnical materia...
The tensile strength of a button refers to the maximum load that a button on a textile garment can withstand when the deformation of its seam with the fabric reaches a certain degree or the button bre...
The tensile testing machine is an instrument that can provide upward and downward adjustable speed motion. Cooperating with a force sensor and a microcomputer or computer, it can test rubber, plastics...
The color fastness of mattress textiles to dry rubbing must meet the standard. Color fastness refers to the resistance of the color of the textile to various effects during processing and use. It is a...
The ICI pilling tester is suitable for detecting the pilling phenomenon caused by friction on the fabric surface without pressure, and is suitable for woven and knitted fabrics. Meet the standards: AS...
Measuring principle of tensile machine: 1.The force value of the tensile testing machine is measured through a load cell, amplifier and data processing system. Under the premise of small deformation, ...
This paper mainly uses the Taber wear tester to conduct actual testing and analysis on the wear resistance of common shoe upper materials such as soft leather, artificial leather, synthetic leather, m...
The tensile testing machine has many functions and can detect the strength of various materials. When the instrument encounters problems and malfunctions, the following methods can help you. One. When...
Color fastness to water is an important test item for textiles and one of the assessment indicators stipulated in the mandatory national standard GB18401 "National Basic Safety Technical Specification...
1.The so-called pilling mechanism of fabrics refers to the formation of hair on the surface of the fabric by one or several fibers, which are then entangled with each other to form a spherical state. ...
This machine can be used to test the bursting strength and height of woven, knitted, non-woven fabrics, paper or sheets. The instrument uses hydraulic blasting to act on a specific area of rubber film...
Measuring shrinkage is one of the common testing methods for textile testing, but practice has proven that the shrinkage of textiles is affected by many factors. Therefore, understanding the factors t...