Whirlpool shrinkage washing machine is one of the necessary testing instruments for many textile enterprises at present. It is used for problems such as large usage and long working hours. Whirlpool washing machine will inevitably have various failures and problems.

Reasons whirlpool washing machines do not drain:

The washing machine that the family USES is to rely on water to wash clothings, still do not have the function of dry cleaning, so washing machine realizes the function of automatic enter and exit water, saved manpower to a great extent, can complete the process that wash clothes effortlessly.But whirlpool washing machine does not drain the situation, as long as the corresponding reason can be found, can quickly solve the problem.

First, the washing machine's drain pipe was blocked or badly bent, blocking the water access, and the channel between the water inside the washing machine and the floor drain was cut off.As the drain pipe is a white hose, once it is bent over 90 degrees, the water cannot be discharged smoothly, leading to the whirlpool washing machine not draining water.

Then, the parts of the washing machine that control the drainage function are out of order. The line that controls the drain switch or the plug wire of the drain electromagnet falls off and causes the failure of whirlpool washing machine that does not drain.By using the washing machine's single dewatering function, which is to turn off the washing and rinsing functions, the washing machine's draining electromagnet is detected as soon as the washing machine is started.Through the multimeter reading, determine whether the washing machine internal wiring is normally connected.This is about to replace the corresponding broken parts, restore the overall function of the washing machine.

Maintenance method:

A complete laundry process is a good function of water and water, through the treatment of dehydration, can reduce the moisture contained in the clothes, so that the clothes can dry faster.One of the most common problems with washing machines is that they don't drain because the drain pipe is blocked or twisted and breaks the flow of water.For the reason of drain pipe, whirlpool washing machine does not drain water maintenance method first is to replace the drain pipe, and straight drain and floor drain connection, to ensure that the water can be successfully removed;It is the circumstance that discharge conduit blocks next, be about to clean discharge conduit, can remove discharge conduit next, remove the foreign body inside tube, install again washing machine interior.

Whirlpool washing machine does not drain water may be the washing machine internal control drainage function circuit, solenoid valve failure.The determination of the fault is through single dehydration function of washing machine, set the washing machine to the dehydration function, cancel the other function, press the start button, smacked if you don't get sucked up vocalist, means that is draining circuit or electromagnetic valve fault, so need to replace the drain line or solenoid valve, Suggestions, please professional maintenance personnel for repair.

Email: hello@utstesters.com

Direct: + 86 152 6060 5085

Tel: +86-596-7686689

Web: www.utstesters.com