+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
The Martindale abrasion tester can be used to test the abrasion resistance and pilling performance of knitted fabrics, woolen fabrics, artificial leather, synthetic leather, etc. under pressure. Abras...
The digital fabric bursting strength meter uses hydraulic blasting (elastic diaphragm method) to measure the expansion of woven, knitted, non-woven fabrics, non-woven fabrics, paper, plates and other ...
The pneumatic fabric bursting strength tester is used to detect the bursting of textiles: woven, knitted, non-woven fabrics, paper or sheets, non-woven fabrics, paper, plastics, cardboard, packaging m...
Manual tear strength tester is used to test the impact tearing strength of textiles, woven fabrics, non-woven fabrics and coated fabrics. Applicable standards: GB3917.1 "Tear Properties of Textile Fab...
The hydrostatic pressure tester is suitable for testing the water permeability performance of various fabrics and non-woven products that have been waterproofed, such as canvas, geotechnical materials...
The classification of leather is quite complex. According to the tanning method, it can include chrome tanned leather, vegetable tanned leather, oil tanned leather, aldehyde tanned leather and combine...
GB4085-2015 was implemented on August 1, 2016. It is a test method for "semi-rigid polyvinyl chloride block flooring". This standard specifies the terminology of semi-rigid polyvinyl chloride block fl...
The main factors that affect the compressive strength of cartons are: ① raw material quality; ② moisture; ③ box type and flute type; ④ printing and opening; ⑤ processing technology. a. Raw material qu...
Twist test principle: The twist is usually not evenly distributed on the entire yarn. When testing the twist, the sample should be taken 1 m away. Under the specified tension, clamp both ends of the s...
The hydrostatic pressure tester is suitable for measuring the water permeability performance of various fabrics and non-woven products that have been waterproofed, such as canvas, geotechnical materia...
The tensile strength of a button refers to the maximum load that a button on a textile garment can withstand when the deformation of its seam with the fabric reaches a certain degree or the button bre...
It is used to evaluate discoloration and staining in color fastness testing. It is divided into grades 1-5 in half-grade increments and is installed in a packaging sleeve. This series of gray cards is...