+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
GB/T 40910-2021 Textiles - Evaluation of Waterproof and Moisture Permeable Properties For what products? All kinds of fabrics and their products Main products: ski suits, jackets, sleeping bags, prote...
Shrinkage test 1) Purpose: To determine the dimensional stability of woven or knitted fabrics after repeated washing in a household washing machine. 2) Principle: Before washing, mark the size on the ...
The waterproof performance of fabrics is mainly divided into the fabric's resistance to being wetted by water and the fabric's resistance to water penetration. Characteristic indicators of the waterpr...
The production and manufacturing processes of textiles are relatively complex. The clothes people wear actually go through countless processes before they are transformed from cotton or yarn into fabr...
1 Scope 1-1 This method is suitable for judging the ability of fabrics to resist pilling and other changes in surface properties. The instrument used is the Martindale tester, and this method is suita...
Universal tensile testing machine: Mainly suitable for tensile testing of rubber, plastics, textiles, geotextiles, waterproof materials, wires and cables, mesh ropes, metal wires, metal rods, metal pl...
1. Scope of application This method uses a hydraulic burst strength tester to measure the burst resistance of textiles. This method is widely used in various textile products. Also suitable for elasti...
What are the methods for testing antistatic properties of textiles? 1. Frictional charging voltage measurement (Rotary Statics) method Principle: Under certain tension conditions, the sample and the s...
The safety and quality of infant products has always received much attention. Faced with the urgent needs of customers and the increasingly stringent safety regulations in the European and American ma...
The xenon lamp climate resistance test uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves that exist in different environments. Xenon lamp test...
1. Purpose and Scope 1.1 This test method determines the drying rate of fabrics. While in contact with a heating plate set at 37°C, the surface temperature of the human skin increases and the body beg...
1.Instrument 1.1 Pendulum-type tearing force testing machine, the test cloth sample is fixed between two jaws, one side is movable and the other side is a fixed structure. The movable jaws are connect...