+86 152 6060 5085
+86 152 6060 5085
Blog
Catalog
Test standards: The fabric's color fastness to light and perspiration is tested using GB/T 14576-2009 "Textiles Color Fastness Test - Light and Perspiration Composite Color Fastness"; the pH value of ...
The main factors that affect the compressive strength of cartons are: ① raw material quality; ② moisture; ③ box type and flute type; ④ printing and opening; ⑤ processing technology. a. Raw material qu...
The hydrostatic pressure tester is suitable for measuring the water permeability performance of various fabrics and non-woven products that have been waterproofed, such as canvas, geotechnical materia...
The tensile strength of a button refers to the maximum load that a button on a textile garment can withstand when the deformation of its seam with the fabric reaches a certain degree or the button bre...
It is used to evaluate discoloration and staining in color fastness testing. It is divided into grades 1-5 in half-grade increments and is installed in a packaging sleeve. This series of gray cards is...
The tensile testing machine is an instrument that can provide upward and downward adjustable speed motion. Cooperating with a force sensor and a microcomputer or computer, it can test rubber, plastics...
The color fastness of mattress textiles to dry rubbing must meet the standard. Color fastness refers to the resistance of the color of the textile to various effects during processing and use. It is a...
Color fastness to water is an important test item for textiles and one of the assessment indicators stipulated in the mandatory national standard GB18401 "National Basic Safety Technical Specification...
This machine can be used to test the bursting strength and height of woven, knitted, non-woven fabrics, paper or sheets. The instrument uses hydraulic blasting to act on a specific area of rubber film...
Measuring shrinkage is one of the common testing methods for textile testing, but practice has proven that the shrinkage of textiles is affected by many factors. Therefore, understanding the factors t...
1. Each time you turn on the instrument and start a new set of tests, you must press the reset button to restart the instrument, otherwise the data processing will be incorrect. 2. When the instrument...
The needle flame test machine uses a needle burner of specified size (Ф0.9mm) to pass a specific gas (butane) to burn the sample at a 45° angle in a regular and directional manner, and observes whethe...