+86 152 6060 5085
+86 152 6060 5085
Twist test principle: The twist is usually not evenly distributed on the entire yarn. When testing the twist, the sample should be taken 1 m away. Under the specified tension, clamp both ends of the s...
The ICI pilling tester is suitable for detecting the pilling phenomenon caused by friction on the fabric surface without pressure, and is suitable for woven and knitted fabrics. Meet the standards: AS...
This paper mainly uses the Taber wear tester to conduct actual testing and analysis on the wear resistance of common shoe upper materials such as soft leather, artificial leather, synthetic leather, m...
1.The so-called pilling mechanism of fabrics refers to the formation of hair on the surface of the fabric by one or several fibers, which are then entangled with each other to form a spherical state. ...
Measuring shrinkage is one of the common testing methods for textile testing, but practice has proven that the shrinkage of textiles is affected by many factors. Therefore, understanding the factors t...
The fabric surface wetting resistance tester is used to determine the wetting resistance (water staining) of fabric surfaces that have or have not been water-resistant or water-repellent finished, eva...
Overview ICI pilling tester is a professional test equipment specially used to evaluate the anti-pilling performance of textile surface. The instrument provides objective data for textile quality cont...
I. Introduction to the instrument The ICI pilling tester is a professional test device used to evaluate the pilling performance of fabrics under friction, developed by the British Chemical Industry Co...